10 super tips to isolate your house
A suitable thermal insulation is presented as the best alternative to prevent loss of heat or cold inside our house and allow us to go for maximum savings at the end of the month and reduce pollution levels by specifying less energy for cooling or heating.
How to know where the produced heat loss of your home and thus act accordingly is by performing an energy certification of the property by a qualified technician. The energy consumption associated with air conditioning and heating accounts for between a third and half of all households.
To maintain proper thermal insulation on the inside of our house, looking for the comfort and well-being as they pursue since healthy housing, we have to take into account some tips:
In the case of the windows, we can use rubber strips on the edges so that the heat cannot escape or penetrate the cold outside. Do not forget, either, to make use of double windows, since its insulating capacity is higher than simple. We’ll talk about them later.
With order to isolate the glass in the windows can choose to wrap it with bubble wrap, arranging air balloons into the glass. Although care is not far from the aesthetic point of view, it will help us to keep our house cool quickly.
-A Carpet arranged in the different rooms of your home can help reduce heat loss. Similarly, if you put newspapers under the carpet you can enhance its insulating function.
-The Double glazed windows and frames with thermal break will help us to avoid differences in temperature between the exterior and interior. These frames contain an insulating material between the inner and outer parts thereof. Through this type of windows we have guaranteed the disappearance of consolidations.
-To avoid the fact that water vapor seep into the rooms through the capillary walls can use insulating materials such as mineral wool or plasterboard with a bar built steam, consisting of an aluminum film adhered to one side of the insulator.
-Also Can use weather-stripping on doors. We refer to metal strips with brooms and sponges which are screwed into the bottom of the doors to keep out the cold. For easier installation you can choose to weather-stripping-pad, which besides offering similar isolation will care the most of the decor of your home.
In the case of the walls you can choose one for you sheets fiberglass, polyurethane or cork, to cover them with plates pad subsequently. If you do not drive in the installation of these materials, you can always serve shelves and boxes so that they can ward off the cold of stay.
-A Time to isolate a roof , you can help one or more layers of dough with rigid elements such as plasterboard or wood and spring with soft absorbent elements such as expanded polystyrene plates. This same dock or insulating member may be affixed to the ceiling with glue. Plasterboard or wood are usually placed as a false ceiling with straps or metal supports.
-A Method effective to insulate the walls we find represented in the trapdoors with rock wool in the chamber. These wall linings are formed by plaster or plaster walls that rise about 10 cm from the walls.
With order to isolate the most noise, you can also opt for wood pallets. These soils are warm and damp the most annoying sounds. Effective and environmentally friendly option, even today, is unusual use as pavement. Ceramic floors are also good and do not require additional materials.
On the other hand, we can also find insulating materials to consider in the construction of housing, the most common concrete, plastic canvas, hollow brick or synthetic stucco.